Thunderheader Black 2-into-1 High Performance Exhaust - 1026B (no ship to CA)

Description

Thunderheader Black 2-into-1 High Performance Exhaust System - 1026B
Part #: 4407262
Manufacturer Part #: 1026B
Overview of Thunderheader Black 2-into-1 High Performance Exhaust System - 1026B
Designed to give maximum horsepower without sacrificing low-end torque 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging For heat shields, order the following: 25-1725, 15 in. long style top front; 25-1724, 23 in. long style top rear; 25-1723, 17 in. collector Included Items: (1) Black 2-into-1 head pipe muffler assembly with non removable baffle (1) Black steel mounting bracket (1) 5/16 in.-18 x 1 1/2 in. hex head bolt (4) 5/16 in. flat washers (3) 5/16 in. lock washers (3) 5/16 in.-18 nuts (1) Black steel mounting clamp (2) 5/16 in.-18 x 1 in. hex head bolts Instructions Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Specs
Color
Black
Style
Tapered Tip
Type - Engine
Twin Cam Style
Type
2-Into-1 System
Units
Each
Weight
18.95 lbs
This item fits the following machines:
Harley-Davidson
1999-2000
Dyna Convertible - FXDS-CONV
1999-2005
Dyna Low Rider - FXDL
2004-2005
Dyna Low Rider Injected - FXDL I
1999-2005
Dyna Super Glide - FXD
2005
Dyna Super Glide Custom - FXDC
2005
Dyna Super Glide Custom Injected - FXDC I
2004-2005
Dyna Super Glide Injected - FXD I
1999-2005
Dyna Super Glide Sport - FXDX
2004-2005
Dyna Super Glide Sport Injected - FXDX I
2001-2003
Dyna Super Glide T-Sport - FXDXT
1999-2005
Dyna Wide Glide - FXDWG
2004-2005
Dyna Wide Glide Injected - FXDWG I
Purchase with confidence:
You may return any unused and unaltered item(s)
within 90 days for an exchange or a refund.
Ebay orders placed by 3pm (central) M-F are shipped the same day!